Aluminum Door Assembly

2AEX Shield Modification Specification:

This specification applies to the GME Lite Shield System

Specifications
  • All welding shall be performed according to the Aluminum Association's Specifications for Aluminum Structures
  • A certified welder shall perform all welding.
  • 3/64 Diameter 5356 welding wire shall be used to complete the welds.
  • The End Bracket replacement part shall be manufactured by GME.
  • Channel C2 X 2 X 1/4 6061-T6 Aluminum.
Procedure
  1. Grind existing weld off using grinding disc made for aluminum materials.
  2. Weld channel to shield as shown.
  3. Weld stop to channel as shown.

Aluminum Door Assembly